Specifications

#1
Messages with a message type of Error (-E) can also be output to syslog according to the specifications of the SYSLOGJOBMSG environment
setting parameter. The value of Facility for these messages is LOG_DAEMON or LOG_USER.
For details about the environment setting parameters, see 15.6.1 Settings for outputting error messages for jobs to syslog in the Job Management
Partner 1/Automatic Job Management System 3 Configuration Guide 1.
#2
This message is not output to syslog and the Windows event log when a job execution control command is executed or job registration fails
from a jobnet.
#3
Messages with a message type of Error (-E) can also be output to syslog according to the specifications of the SYSLOGJOBMSG environment
setting parameter. The value of Facility for these messages is LOG_DAEMON.
For details about the environment setting parameters, see 15.6.1 Settings for outputting error messages for jobs to syslog in the Job Management
Partner 1/Automatic Job Management System 3 Configuration Guide 1.
#4
Output destinations of these messages depend on an option specified for the command.
1.3.6 Output destinations of messages beginning with KAVV
The following table lists the output destinations of the messages beginning with KAVV (messages for the JP1/AJS3 -
View).
In Windows 8, Windows Server 2012, Windows 7, Windows Server 2008, or Windows Vista:
%ALLUSERSPROFILE%\Hitachi\JP1\JP1_DEFAULT\JP1AJS2V\log\ajs2view#nnnn_{1|
2}.log
The default for %ALLUSERSPROFILE% is system-drive\ProgramData.
In Windows Server 2003 or Windows XP Professional:
JP1/AJS3 - View-installation-folder\log\ajs2view#nnnn_{1|2}.log
The default installation folder for JP1/AJS3 - View is
System Drive\Program Files
#
\HITACHI\JP1AJS2V.
#
For 64-bit versions of Windows, replace Program Files with Program Files (x86).
Supplementary notes
• If a single unit of JP1/AJS3 - View is running, #nnnn_ is not displayed. If more than one unit of JP1/AJS3 -
View is running, any value from 0001 to 9999 is assigned to #nnnn_.
• JP1/AJS3 uses the JP1/Base process monitor. When monitoring troubles in JP1/AJS3, also monitor messages
related to the JP1/Base process monitor.
1.3.7 Output destinations of messages beginning with KFP
Output destinations of the messages whose message ID begins with KFP can be identified by the output destination
type shown in the explanation of each message. The following shows the meaning of the output destination types:
• A: Embedded type (output as embedded information in another message)
• E: Standard error output
• L: Windows event log or syslog
• S: Standard output
1. Overview of JP1/AJS3 Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
66