Specifications

KAVT1217-I
An instance was established by the search for events prior to execution. (job-name, Event Arrived Time=arrival-
time-of-event-satisfying-conditions)
As a result of the pre-execution event search, the system found an event that satisfies the job conditions.
(S)
Continues processing.
KAVT1226-W
Old JP1 events will be discarded because the number of preserved JP1 events issued during a search of pre-execution
events has exceeded the threshold. (Seq No=serial-number-in-event-DB, Event ID=event-ID-basic-code, Event
Arrived Time=event-arrival-time)
JP1 events will be discarded, beginning from the oldest one, because the number of held events generated during a
search of pre-execution events has exceeded the threshold.
(S)
Deletes JP1 events generated during a search of pre-execution events, beginning from the oldest one, each time the
threshold is exceeded, and continues processing.
(O)
Check whether all of the JP1 events having a serial number greater than the one indicated in serial-number-in-event-
DB were detected. If any one of these JP1 messages was not detected, change the status of the job as required.
Alternatively, if you are using the status-inherit option, again generate the event that meets the monitoring condition.
KAVT2001-I
The file monitoring process will now start.
The file monitoring process starts.
(S)
Starts the file monitoring process.
KAVT2004-I
The file (
file-name) was created.
The file was created.
(S)
Continues processing.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
579