Specifications

(S)
Retries connection to the JP1/Base event service. No events can be monitored until the KAVT1004-I or KAVT1044-
I message is output.
(O)
See the description of the API settings file (api) in the Job Management Partner 1/Base User's Guide, and check
whether the api file is set correctly.
Also check whether the JP1/Base event service is running. If the JP1/Base event service has been terminated
unintentionally, contact the system administrator, and collect data (see 1.2.3 To the system administrators)
KAVT1041-W
A macro variable exceeds 4096 bytes.
An event that meets the specified monitoring condition occurred, but the sum of the size of values specified in macro
variables exceeded 4,096 bytes.
(S)
Truncates the portion after the 4,096th byte and continues processing. The maximum size of the value for macro
variables is 4,096 bytes.
(O)
Redefine the macro variable so that the sum of the size of values specified in the macro variables does not exceed
4,096 bytes. The portion exceeding the 4,096th byte is not passed to the succeeding jobnet or job. Check the status
of the succeeding jobnet or job. If you find any problem, recheck the job definition.
KAVT1042-E
Failed to start. maintenance-information maintenance-information
An attempt to initialize the JP1 event monitoring process has failed.
(S)
Terminates the JP1 event monitoring process. A Receive JP1 Event job, a Monitoring Log Files job, or a Monitoring
Event Log job cannot be monitored.
(O)
The error is caused by an internal factor of the event/action control. Contact the system administrator and collect
data (see 1.2.3 To the system administrators).
KAVT1045-E
A log-file trap command parameter could not be created. (
maintenance-information)
Internal processing required for starting the Monitoring Log Files job has failed.
(S)
Memory was insufficient. The system terminated the Monitoring Log Files job abnormally.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
570