Specifications

KAVT1026-W
The end judgment file includes no data. (end-judgment-file-name)
The end judgment file specified in the Receive JP1 Event job does not contain data.
(S)
Ignores information about end judgment and continues processing.
If Normal if message matches or Normal if details match is specified for End judgement, the system terminates
the relevant JP1 event reception monitoring job abnormally.
If Abnormal if message matches or Abnormal if details match is specified for End judgement, the system
terminates the relevant JP1 event reception monitoring job normally.
(O)
Check the contents of the file specified in the Receive JP1 Event job. End judgment of the job may not have been
performed correctly. Check the Receive JP1 Event job.
KAVT1027-E
An error occurred during processing of an end judgment file. (end-judgment-file-name)
The end judgment file specified in the Receive JP1 Event job cannot be read.
(S)
Assumes that the end judgment information does not exist. Continues processing.
Terminates the Receive JP1 Event job abnormally.
(O)
Check whether the system resources are sufficient, and whether the user who started JP1/AJS3 can view the file
specified in the Receive JP1 Event job. End judgment of the job may not have been performed correctly. Check the
Receive JP1 Event job.
KAVT1028-E
Memory became insufficient. (maintenance-information)
Memory was insufficient during processing of the event job.
(S)
Continues processing. The system determines the event job to be an error depending on the location where the error
occurred.
(O)
See 3. Estimates in the Job Management Partner 1/Automatic Job Management System 3 System Design
(Configuration) Guide, and make sure that the required amount of memory for executing JP1/AJS3 has been
allocated.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
567