Specifications

(O)
Use the jbsgetcnf command to check whether you can acquire common definition information for the logical
host that caused the error. If you cannot acquire the common definition information, re-install JP1/Base. If you can
collect it, contact the system administrator and collect data (see 1.2.3 To the system administrators).
KAVT1004-I
The event sever was connected. (event-server-name)
The JP1/Base event service was connected.
(S)
Continues processing.
KAVT1005-W
Connection to the event server is not possible now. (event-server-name)
Connection to the JP1/Base event service was released.
(S)
Retries connection to the JP1/Base event service. A Receive JP1 Event job, a Monitoring Log Files job, or a
Monitoring Event Log job cannot be monitored until the JP1/Base event service can be connected again.
(O)
Check whether the JP1/Base event service has started.
KAVT1006-I
Connecting the event server will be retried. (event-server-name)
The system will retry the connection to the JP1/Base event service.
(S)
Continues processing.
KAVT1007-W
The event sever is inactive. (
event-server-name)
The JP1/Base event service has not yet started.
(S)
Continues processing while retrying the connection because the JP1/Base event service has not started. A Receive
JP1 Event job, a Monitoring Log Files job, or a Monitoring Event Log job cannot be monitored until the JP1/Base
event service starts.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
564