Specifications

For a physical host, JP1_DEFAULT is indicated in host-name.
If the connection source IP address was not obtained, null characters are output for connection-source-IP-address.
(S)
Ignores the request and continues processing.
(O)
- If reason is Restricted:
If the request from the IP address indicated in connection-source-IP-address must be accepted, perform the
following:
1. Add the connection source IP address by editing the agent connection permission configuration file on the
host where this message was output.
2. Execute the jajs_pmtcon command to apply the change to the connection permission configuration file.
3. If necessary, perform the request processing again.
- If reason is Error:
Follow the instructions given by the KAVS8033-E message that was output immediately before this message.
KAVT1001-I
The event-receiving process will now end.
The event (such as a JP1 event and log trap) monitoring process will now terminate.
(S)
Terminates the event (such as a JP1 event and log trap) monitoring process.
KAVT1002-I
The event-receiving process will now start
The event (such as a JP1 event and log trap) monitoring process will now start.
(S)
Continues processing.
KAVT1003-E
Failed to get logical host. (
maintenance-information) (maintenance-information)
Information required for operating an event (such as a JP1 event and log trap) monitoring process could not be acquired.
(S)
Terminates the event (such as a JP1 event and log trap) monitoring process. A Receive JP1 Event job, a Monitoring
Log Files job, or a Monitoring Event Log job cannot be monitored.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
563