Specifications

memory was output at the same time the error occurred. If a log indicating insufficient memory was output, recheck
the memory estimate. If other unnecessary applications are running, stop them. If the cause of the error is not
insufficient memory, collect the internal trace log and then contact the system administrator.
KAVT0912-E
Event Action process ended abnormally. (name : process-name, code : return-code, pid : process-ID, sig : signal-
number)
The process indicated in process-name terminated abnormally with the return code indicated in return-code.
In Windows:
The signal number is 0.
In UNIX:
When the signal number is other than 0, the process terminated abnormally in response to the signal for the signal
number.
The probable causes are:
• A JP1/AJS3 resident process was terminated abnormally by a signal.
• A JP1/AJS3 resident process was terminated forcibly by jajs_killall.cluster command.
(S)
Terminates the event/action control if the process indicated in process-name is either of the following:
• jpomgrsub
• jpoagtsub
If one of the following processes is indicated in process-name, the system operates at a reduced level while the
function of the process is disabled:
• jpoeventwatch: Receive JP1 Event job, Monitoring Log Files job, or Monitoring Event Log job
• jpocwtflMain: Monitoring Files job
• jpocwtmlmain: Email Reception Monitoring job
• jpocwtmqmain: Receive MQ Message job
• jpocwttmMain: Interval Control job or an event job with a timeout specified
• jpocwtmsmain: Receive MSMQ Message job
- Operations based on the specification of the detail process termination option
• When N is specified for the EVProcessHA environment setting parameter to disable the detail process
termination option, if a job related to a detail process that terminated abnormally is registered for execution,
the job terminates abnormally.
For example, the file monitoring job that is executed when the jpocwtflMain process has terminated
abnormally terminates abnormally.
• If you use a cluster system or enable the detail process termination option by specifying Y for the
EVProcessHA environment setting parameter or using the default, the system terminates the event/action
control if an error occurs. At this time, operation does not continue at a reduced level irrespective of the
process indicated in process-name.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
556