Specifications

(O)
Wait until the change of the configuration definition information (environment setting) terminates, than then retry.
KAVT0409-I
The data was sent to the agent.
The data was sent to the agent.
(S)
Continues processing.
KAVT0410-E
The parameter (parameter) after replacing a macro variable is too long (length=parameter-length).
The parameter, after replacing a macro variable, is too long.
(S)
Determines the event job to be an error.
(O)
Recheck the setting of the parameter that caused the error, and then re-execute the event job. If ex is indicated in
parameter, also check the setting of the jobnet execution host.
KAVT0411-E
The macro variable (macro-variable-name) has not been inherited.
The macro variable was not inherited.
(S)
Determines the event job to be an error.
(O)
The macro variable has not been inherited from the preceding job. Recheck the jobnet definition, and then re-execute
the event job.
KAVT0412-W
The half at new branch execution ID acquisition waiting time has passed. (AjsServiceName=
scheduler-service-
name, UnitID=unit-ID, ExecID=execution-ID)
One half (30 minutes
#2
) of the waiting time for acquisition of the branch execution ID (one hour
#1
) has passed.
30 minutes
#2
later, the status of the jobnet with start conditions might change to Monitor terminated.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
528