Specifications

KAVT0288-I
Disaster recovery start processing will be performed.
The event/action control manager on the remote site is beginning the disaster recovery start process.
(S)
Continues processing.
KAVT0289-E
Failed to perform the disaster recovery start process.(maintenance-information)
The event/action control manager on the remote site failed to perform the disaster recovery start process.
(S)
One or more event job that was running on the main site remains in Now running status.
(O)
Check the jobnet status using a command or JP1/AJS3 - View, and forcibly terminate any event jobs or jobnets with
start conditions that are in Now running status.
KAVT0293-W
An attempt to communicate with the agent has failed.(host=agent-host-name, maintenance-information,
IPAddress=IP-address
#
)
An attempt to communicate with the agent indicated by host= agent-host-name has failed.
The start time of a jobnet with a start condition or an event job might be delayed.
#
The IP address is output only when the LOGIPV6INFOALL environment setting parameter is set to yes. If the
LOGIPV6INFOALL environment setting parameter is set to yes and the IP address is unknown, unknown is
displayed.
(S)
Retries communication after the predefined period of time.
For details on this time, see Table 2-3 in 2.2.2(5) Notes on manager/agent system configurations in the Job
Management Partner 1/Automatic Job Management System 3 System Design (Configuration) Guide.
(O)
The cause of the communication error might be one of the following:
• There is a network failure.
• The agent machine or the JP1/AJS3 has stopped.
• The IP address of agent-host-name cannot be acquired.
If there is a network failure, investigate the cause of the network failure and correct the cause.
If the agent machine indicated by host=agent-host-name or JP1/AJS3 has stopped, restart the agent machine or JP1/
AJS3.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
514