Specifications

KAVT0250-W
Because the total of macro variables exceeded the maximum, part of the data was truncated.(maintenance-
information)
The total number of macro variables exceeded the limit. A part of the data was truncated.
(S)
Inherits the macro variables with the part of data truncated.
(O)
Redefine the macro variables so that the sum of the size of the values specified in the macro variables does not
exceed 4,096 bytes. In particular, if you define a jobnet with start conditions using AND, the macro variables for
all of the event jobs defined in the jobnet with start conditions will be merged. Therefore, make sure that the total
size of the values specified in merged macro variables does not exceed 4,096 bytes.
KAVT0261-E
The report to scheduler service failed. (AjsServiceName=scheduler-service-name, UnitID=unit-ID,
ExecID=execution-ID, maintenance-information)
The data could not be sent to the scheduler service.
(S)
Continues processing without changing the status of the unit (a jobnet with start conditions or an event job).
(O)
Check whether the scheduler service has started. If it has started, the unit (a jobnet with start conditions or an event
job) indicated by AjsServiceName=scheduler-service-name, UnitID=unit-ID, and ExecID=execution-ID
may not have been registered, executed, or operated, or processing may not have been done in response to the event.
Use the ajsname command with the -I option to identify the unit name from the unit ID. Make sure that the status
of the identified unit (a jobnet with start conditions or an event job) has not changed, and then re-register the jobnet
or job for execution. Alternatively, use the ajschgstat command or the Change Job Status dialog box to change
the status.
KAVT0268-W
The data arrival confirmation of a socket failed. (maintenance-information) (host=agent-host-name, maintenance-
information, IPAddress=IP-address
#
)
An attempt to communicate with the agent indicated in agent-host-name has failed due to a temporary communication
error. The start time of a jobnet with start conditions or an event job may be delayed.
#
The IP address is output only when the LOGIPV6INFOALL environment setting parameter is set to yes. If the
LOGIPV6INFOALL environment setting parameter is set to yes and the IP address is unknown, unknown is
displayed.
(S)
Retries communication after the predefined period of time.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
509