Specifications

KAVS8034-E
The connection permitted hosts list cannot be refreshed because the connection source restriction function is
disabled.
The list of hosts permitted to connect cannot be updated because the connection source restriction function is disabled.
The probable causes are:
• The connection source restriction function was not set.
• Neither of the following service is running:
- JP1/AJS3 service
- JP1/AJS3 Queueless Agent service
• If a logical host on which processing is to be performed is specified, the logical host is not attached to the queueless
agent service.
(S)
Terminates processing.
(O)
Enable the connection source restriction function. For details about how to enable this function, see 4.4 Settings for
restricting connections to JP1/AJS3 in the Job Management Partner 1/Automatic Job Management System 3
Configuration Guide 1 (for Windows) or 14.4 Settings for restricting connections to JP1/AJS3 in the Job
Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for UNIX).
KAVS8036-E
The content of the connection permission configuration file(file-name) is invalid. (line: line-number)
The connection permission configuration file contains an error. The location of the error is indicated in line-number in
the message.
(S)
Continues processing.
(O)
Check and, if necessary, revise the contents of the connection permission configuration file, and then re-execute the
command. For details about the connection permission configuration file, see 4.4 Settings for restricting connections
to JP1/AJS3 in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for
Windows), or 14.4 Settings for restricting connections to JP1/AJS3 in the Job Management Partner 1/Automatic
Job Management System 3 Configuration Guide 1 (for UNIX).
KAVS8037-E
The number of IP addresses specified in the connection permission configuration file(
file-name) exceeded the
maximum limit.(line: line-number, maximum: maximum-value)
Because the number of IP addresses specified in the connection permission configuration file exceeded the maximum,
any address after the line indicated in line-number has been ignored.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
490