Specifications

• The unit specified for the jobnet connector does not exist.
• The type of the unit specified for the jobnet connector is invalid.
(S)
Places the connection-destination jobnet into Ended abnormally status.
(O)
Correct the error, and then re-execute the connection-destination jobnet.
KAVS4707-E
Cannot execute the jobnet for the connection destination(jobnet-name) because the jobnet connector is not defined
to connect.
The connection-destination jobnet cannot be executed because connection is not established from the jobnet connector.
The probable cause is:
• The connection-destination jobnet is not specified for the jobnet connector.
(S)
Places the connection-destination jobnet into Ended abnormally status.
(O)
Correct the error, and then re-execute the jobnet connector.
KAVS4708-E
An attempt of job status notification from the jobnet for the connection destination(jobnet-name:execution-ID) has
failed. : maintenance-information
The status of the jobnet connector might be incorrect because the connection-destination jobnet failed to send a status
notification to the jobnet connector.
(S)
Continues processing.
(O)
Take action according to the Windows event log, syslog, or integrated trace log message that was output immediately
before this message.
Note that the relationship between the jobnet connector and the connection-destination jobnet might have been
invalid. In this case, the status of the jobnet connector might not have been changed correctly according to the status
of the connection-destination jobnet. If necessary, manually change the status of the jobnet connector.
KAVS4710-E
Cannot use the controlling execution order of Root jobnet between scheduler services. (
scheduler-service-name) :
maintenance-information
The jobnet connector or the connection-destination root jobnet cannot be executed. The probable causes are:
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
448