Specifications

(O)
To configure a new logical host to operate as the main site in disaster recovery mode, execute the jajs_rpsite
command with the -m SET option specified.
If the shared disk of the logical host is not mounted, mount it and then re-execute the command.
Depending on the hardware, you might be unable to mount the disk at the remote site while the disk copy and
mirroring functions are being used. See the documentation for your hardware to find out whether this is possible.
KAVS3704-E
The disaster recovery operation cannot be set up because the shared disk cannot be accessed.
The system cannot set up disaster recovery operation because it cannot access the shared disk.
(S)
Terminates processing.
(O)
Use a hardware operation to make the shared disk accessible, and then re-execute the jajs_rpsite command.
KAVS3706-E
Scheduler service cannot start in the disaster recovery start mode using a compatible ISAM configuration.
You cannot start JP1/AJS3 in disaster recovery mode (-disaster) when using a compatible ISAM configuration.
(S)
Terminates command execution.
(O)
System management is terminated.
Change the start mode option and then restart JP1/AJS3.
KAVS3707-I
The logical host used as the main site has been specified. (host: host-name)
A message indicating that a logical host has been configured as the main site.
(S)
Terminates command execution.
KAVS3708-I
The logical host used as the main site has been changed. (host:
host-name)
A message indicating that a logical host used as the main site has been changed.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
417