Specifications

(O)
Set up the environment for the logical host indicated in logical-host-name, and then restart the check agent service.
If the error occurred during execution of a command, make sure that the correct logical host name is specified in
the argument.
KAVS3417-I
An error occurred during an attempt to acquire the configuration definition of the logical host (logical-host).
(function=maintenance-information-1, code=maintenance-information-2)
An attempt to acquire the value of the environment setting parameter for the logical host indicated in logical-host-
name has failed.
(S)
Continues processing if the error occurred during startup of a check agent service. However, the logical host is not
handled as the host where the job was executed. The system cancels processing if the error occurred during execution
of a command.
(O)
Make sure that the correct value is set in the environment setting parameter for the logical host indicated in logical-
host, and then restart the check agent service. If the error occurred during execution of a command, make sure that
the correct logical host name is specified in the argument.
KAVS3418-I
Memory is insufficient, so the job (job-name) cannot be accepted.
The job cannot be accepted due to insufficient memory.
(S)
Cancels checking of the job.
(O)
Wait until the required amount of memory for checking the job becomes available, and then pre-check the definitions
again.
KAVS3419-I
An iconv_open error occurred, so character conversion is not possible. :
maintenance-information-1 (maintenance-
information-2)
The character set will not be converted because the preparation for conversion has failed.
(S)
Continues processing.
(O)
To convert the character set, check the settings of the character set and then restart the check agent.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
410