Specifications

• jajs_setup command
• jajs_setup_cluster command
• ajsembdbuninstl command
In this case, take appropriate action for the message output to the standard output according to the action to be taken
when an error occurs in each command.
KAVS2129-I
The Embedded DB configuration file does not exist.
The embedded database configuration file does not exist.
(S)
Cancels command execution.
(O)
The command cannot be executed because the embedded database is not configured, or has been configured with a
JP1/AJS3 version earlier than 10-00.
If this message is output for an embedded database configured with JP1/AJS3 10-00 or later, check whether the
embedded database configuration file below exists. If the file does not exist, create the embedded database again,
and then execute the command.
In Windows:
embedded-database-practical-directory\conf\ajsdbst\ajsembdbsetup-identifier.conf
In UNIX:
embedded-database-practical-directory/conf/ajsdbst/ajsembdbsetup-identifier.conf
KAVS2130-E
There is an error in the Embedded DB configuration file.
The embedded database configuration file contains an error.
(S)
Cancels command execution.
(O)
Specify the file correctly, and then re-execute the command. If this message is output during execution of the
ajsembdbstatus command, create the embedded database again, and then execute the command.
KAVS3400-I
An error occurred while adding the JP1/AJS2 Check Manager service. : code=
return-value api=API-name err=API-
return-value
An error occurred while the JP1/AJS3 Check Manager service was being added.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
405