Specifications

KAVS2128-E
Failed to set up embedded service. : func code=function-code error code=error-code
An attempt to set up the embedded database has failed.
(S)
Terminates processing.
(O)
If an attempt to install JP1/AJS3 has failed, take the following action, and then uninstall JP1/AJS3 and install it
again.
If an attempt to uninstall JP1/AJS3 has failed, take the following action, and then uninstall JP1/AJS3 again.
If this message containing the same function code appears repeatedly, back up the following directory below the
JP1/AJS3 installation directory, and then contact the system administrator:
Action
For func code=1:
If the KAVS2127-E message was output before this message, take action according to the instructions given by
the KAVS2127-E message.
If the KAVS2127-E message was not output, uninstall JP1/AJS3 and then install it again.
For func code=2:
Review the environment where JP1/AJS3 is to be installed.
Make sure that there is sufficient memory and disk space.
For func code=3:
Take action according to the instructions given by the KAVS2127-E message that was output before this
message.
For func code=4:
Review the environment where JP1/AJS3 is to be installed.
Make sure that there is sufficient memory and disk space.
For func code=5:
Information about the embedded database that has already been uninstalled might remain in the JP1/AJS3
common definition information. Execute all the following commands to delete the common definition
information:
jbsunsetcnf -i -h JP1_DEFAULT -c JP1AJS2 -n EMBDBINSTALL
jbsunsetcnf -i -h JP1_DEFAULT -c JP1AJS2 -n EMBDB
jbsunsetcnf -i -h JP1_DEFAULT -c JP1AJS2 -n EMBDBPORT
For details on the jbsunsetcnf command, see the Job Management Partner 1/Base User's Guide.
For func code=6:
Take action for the output error code according to 2.8.9(1) Action to be taken if a JP1/AJS3 - Manager installation
error occurs in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.
For func code=7:
Take action for the output error code according to 2.8.9(2) Action to be taken if a JP1/AJS3 - Manager
uninstallation error occurs in the manual Job Management Partner 1/Automatic Job Management System 3
Troubleshooting.
Note that this message is also output to the Windows event log or syslog if execution of the following commands
has failed:
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
404