Specifications

and then execute the ajsembdbbuild command. For details about the error messages and the applicable actions,
see Actions to be taken if an error occurs in the ajsembdbbuild in 2. Commands Used during Setup in the manual
Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.
KAVS2125-E
Cannot create directory or file.
The directory or file cannot be created because, for example, you do not have access permission for the embedded
database practical directory.
(S)
Cancels command execution.
(O)
Check whether you have write permission for the embedded database practical directory. Also check whether the
disk has sufficient free space.
KAVS2126-E
Embedded setup environment already exists.
The specified embedded database practical directory has already been associated with another setup ID.
(S)
Cancels command execution.
(O)
Make sure that the specified embedded database practical directory is associated correctly.
Use the ajsembdbidlist command to check the association between the embedded database practical directory
and the setup ID.
KAVS2127-E
An error has occurred in the command (command-name). : maintenance-information
An error occurred in the command for the embedded database.
(S)
Terminates processing.
(O)
If an attempt to install JP1/AJS3 has failed, take appropriate action for the code and message indicated in
maintenance-information according to the 2.8.8(4) Action to be taken if an error occurs during embedded database
setup in the manual Job Management Partner 1/Automatic Job Management System 3 Troubleshooting.
This message is also output to the Windows event log or syslog if execution of the ajsembdbbuild command
has failed. In this case, take appropriate action for the message output to the standard output according to the action
to be taken when an error occurs in the ajsembdbbuild command.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
403