Specifications

A reloading attempt failed. This message appears when the embedded database does not have sufficient space during
execution of the ajsembdbrorg -k reld command.
(S)
Cancels command execution.
(O)
Execute the ajsembdbstatus -s prc command to make sure that the command you executed has stopped,
and then retry.
When unloaded data is reloaded, the embedded database allocates the space required for the operation, sometimes
resulting in a shortage of free space in the area that was used before unloading. If this problem occurs, execute the
ajsembdbreclaim command to reclaim area that has become invalid, and then re-execute the command. If the
ajsembdbreclaim command is unable to reclaim enough area, you must add area.
KAVS2108-E
Invalid Embedded service definition.
The environment of the embedded database does not permit execution of the command. To execute the
ajsembdboplog -r -t command, ajsembdbbuild -bl must have been specified for this environment.
(S)
Cancels command execution.
(O)
Check the environment of the embedded database on which you want to execute the command. If ajsembdbbuild
-bl was not specified when the environment was created, consider creating the environment of the embedded
database again.
KAVS2109-E
Specified file (file-name) exists.
An attempt to create a file has failed. This message appears when an existing file is specified in the -o option of the
ajsembdboplog command.
(S)
Cancels command execution.
(O)
Either change the specified file name or delete the existing file, and then re-execute the command.
KAVS2113-E
Failed to read the configuration definition.
An attempt to read the configuration definition has failed. The configuration definition required for operation of the
embedded database has not been set. This message appears when the embedded practical directory for the scheduler
database cannot be acquired during execution of a data collection tool.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
398