Specifications

KAVS2060-E
Embedded DB operation failed. (setup-identifier)(host-name)
The database management process was unable to perform an embedded database operation.
(S)
Terminates processing.
(O)
The probable causes are below. Take action according to the cause of the error.
Cause 1
The JP1/AJS3 service was started while the JP1/AJS3 Database service was being stopped.
Action
If you are performing JP1/AJS3 Database service operations manually, stop the JP1/AJS3 Database service, and
then start the JP1/AJS3 service.
If the embedded database is being stopped, start the JP1/AJS3 service after you confirm that the embedded
database has stopped.
Cause 2
The JP1/AJS3 Database service was stopped while the JP1/AJS3 service was being started.
Action
Do not perform JP1/AJS3 Database service operations or start or stop the embedded database while the JP1/
AJS3 service is being started.
Stop the JP1/AJS3 Database service or embedded database, and then start the JP1/AJS3 service.
Cause 3
The embedded database was forced to terminate while the JP1/AJS3 service was being started.
Action
See the action for cause 2.
Cause 4
The JP1/AJS3 Database service was started while the JP1/AJS3 service was being stopped.
Action
Do not start the JP1/AJS3 Database service while the JP1/AJS3 service is being stopped.
If the JP1/AJS3 Database service or embedded database was not stopped by stopping the JP1/AJS3 service, stop
it separately.
Cause 5
The JP1/AJS3 Database service was stopped while the JP1/AJS3 service was running.
Action
Do not perform JP1/AJS3 Database service operations while the JP1/AJS3 service is running.
If the JP1/AJS3 service terminated abnormally, restart it.
If some JP1/AJS3 service processes have started, stop the JP1/AJS3 service, and then restart it.
Cause 6
An error occurred in the embedded database while the JP1/AJS3 service was being started, being stopped, or
while it was running.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
395