Specifications

(S)
Cancels the command.
For the queueless cluster process, the system cancels the processing to attach the logical host. Then, by default, the
system continues startup processing without abnormally terminating the queueless cluster process.
If you want to abnormally terminate the queueless cluster process, specify error for the AJSQL_CLUSTERREQ
environment setting parameter.
For details about AJSQL_CLUSTERREQ, see 2.7 Setting up the queueless job execution environment in the Job
Management Partner 1/Automatic Job Management System 3 Configuration Guide 2.
If the processing to detach the logical host has been canceled, the system abnormally terminates the queueless cluster
process.
(O)
Restart the service, and then re-execute the command.
If this message is output when the queueless cluster process is being started, execute the ajsqlstatus command
to make sure that the target host indicated in host-name has stopped, and then restart the JP1/AJS3 service on the
target host indicated in host-name.
If this message is output when the queueless cluster process is being stopped or when the ajsqldetach command
is executed, no action is required.
Example: In this example, the command outputs detailed information for the logical host Lhost.
Execute the ajsqlstatus command as follows:
ajsqlstatus -h Lhost
For details on the ajsqlstatus command, see ajsqlstatus in 3. Commands Used for Special Operation in the
manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.
KAVS1999-E
Execution of a job at a destination that does not permit execution was suppressed according to the settings specified
in the execution agent profile.(logical-host-name:scheduler-service-name:execution-destination:maintenance-
information)
An attempt to execute a job failed because the specified execution host is not permitted in the execution agent profile.
(S)
Ends the job abnormally in failed to start status.
(O)
The probable causes are as follows:
• The wrong host name is specified as the execution agent in the detailed definition of the job.
• The execution host name is specified incorrectly in the execution agent profile.
If the wrong execution host name is specified in the detailed definition of the job, specify the correct host name and
then re-execute the job.
If the execution agent profile is configured incorrectly, correct the error. Then, use the ajsprofalter command
to apply the corrected profile to the scheduler service, and execute the job again.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
391