Specifications

If the error occurred when the queueless cluster process was being started, restart the JP1/AJS3 service.
If the error occurred when the queueless cluster process was being stopped, execute the ajsqldetach command
to detach the logical host that caused the error.
If you cannot correct the problem by taking the above actions, contact the system administrator, and then collect
data (see 1.2.3 To the system administrators).
KAVS1993-E
A buffer shortage occurred during the communication with the service (service-name).: maintenance-information
The available buffer became insufficient during communication with the service.
(S)
Cancels command execution.
For the queueless cluster process, the system cancels the processing to attach the logical host. Then, by default, the
system continues startup processing without abnormally terminating the queueless cluster process.
If you want to abnormally terminate the queueless cluster process, specify error for the AJSQL_CLUSTERREQ
environment setting parameter.
For details about AJSQL_CLUSTERREQ, see 2.7 Setting up the queueless job execution environment in the Job
Management Partner 1/Automatic Job Management System 3 Configuration Guide 2.
If the processing to detach the logical host has been canceled, the system abnormally terminates the queueless cluster
process.
(O)
The probable causes of the error include high load on the network and insufficient memory. Check the status of the
network and memory, and then re-execute the command that resulted in the error.
If the error occurred when the queueless cluster process was being started, restart the JP1/AJS3 service.
If the error occurred when the queueless cluster process was being stopped, execute the ajsqldetach command
to detach the logical host that caused the error.
If you cannot correct the problem by taking the above actions, contact the system administrator, and then collect
data (see 1.2.3 To the system administrators).
KAVS1994-E
Database file install directory is invalid.: (directory-name) (return-code)
The directory path specified in AJSDBDIRECTORY is incorrect. Alternatively, if the primary node of a cluster is being
set up, the shared disk may have not been mounted.
(S)
Cancels command execution.
(O)
Check the directory path specified in AJSDBDIRECTORY. If this message appears during setup of the primary node
of a cluster, check whether the shared disk has been mounted.
After completing the above checks, re-execute the setup command.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
389