Specifications

If the service has started, wait a while and then retry the operation. If the retry does not correct the error, contact the
system administrator and collect data (see 1.2.3 To the system administrators).
You can use either of the following methods to check whether the service has started:
In Windows:
In Control Panel or Administrative Tools, double-click Services, and check the status of the service.
In UNIX:
Use the ps command to make sure that the service for the process exists.
For details about the process that you should check, see B.3 Processes (for UNIX) in the manual Job Management
Partner 1/Automatic Job Management System 3 Troubleshooting.
If this message is output when the queueless cluster process is being started, wait until the service has started, and
then take either of the following actions to attach the logical host:
• Restart the JP1/AJS3 service.
• Use the ajsqlattach command to attach the logical host.
If this message is output when the queueless cluster process is being stopped, no action is necessary because the
service has already stopped.
KAVS1990-E
An error occurred during the communication with the service (service-name) because a network access error
occurred.: maintenance-information
A network access error occurred during communication with the service indicated in service-name.
(S)
Cancels command execution.
For the queueless cluster process, the system cancels the processing to attach the logical host. Then, by default, the
system continues startup processing without abnormally terminating the queueless cluster process.
If you want to abnormally terminate the queueless cluster process, specify error for the AJSQL_CLUSTERREQ
environment setting parameter.
For details about AJSQL_CLUSTERREQ, see 2.7 Setting up the queueless job execution environment in the Job
Management Partner 1/Automatic Job Management System 3 Configuration Guide 2.
If the processing to detach the logical host has been canceled, the system abnormally terminates the queueless cluster
process.
(O)
Execute the ping and jp1ping commands to make sure that communication with the service indicated in service-
name is possible. If communication is not possible, confirm that the host name and IP address of the host that executes
queueless jobs are correctly registered in the DNS settings, hosts file, jp1hosts file, or jp1hosts2 file.
After taking the above actions, re-execute the command that resulted in the error. If the error occurred when the
queueless cluster process was being started, restart the JP1/AJS3 service.
If the error occurred when the queueless cluster process was being stopped, execute the ajsqldetach command
to detach the logical host that caused the error.
If you cannot correct the problem, contact the system administrator, and then collect data (see 1.2.3 To the system
administrators).
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
387