Specifications

KAVS1955-E
The specified host (host-name)has already been attached.
The specified host indicated in host-name has already been attached.
(S)
Cancels command execution.
(O)
Execute the ajsqlstatus command to check the status of the host indicated in host-name. If the host indicated
in host-name has been detached, execute the ajsqlattach command to attach this host.
Examples:
• In this example, the command outputs detailed information for the logical host Lhost.
Execute the ajsqlstatus command as follows:
ajsqlstatus -h Lhost
For details on the ajsqlstatus command, see ajsqlstatus in 3. Commands Used for Special Operation
in the manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.
• In this example, the command attaches the logical host Lhost.
Execute the ajsqlattach command as follows:
ajsqlattach -h Lhost
For details on the ajsqlattach command, see ajsqlattach in 3. Commands Used for Special Operation
in the manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.
KAVS1956-E
An attempt to read the configuration definition failed.
An attempt to read the environment setting parameter has failed.
(S)
Cancels command execution.
For the queueless cluster process, the system cancels the processing to attach the logical host. Then, by default, the
system continues startup processing without abnormally terminating the queueless cluster process.
If you want to abnormally terminate the queueless cluster process, specify error for the AJSQL_CLUSTERREQ
environment setting parameter.
For details about AJSQL_CLUSTERREQ, see 2.7 Setting up the queueless job execution environment in the Job
Management Partner 1/Automatic Job Management System 3 Configuration Guide 2.
(O)
Confirm that the host name and IP address of the host that executes queueless jobs are correctly registered in the
DNS settings, hosts file, jp1hosts file, or jp1hosts2 file. At the same time, make sure that memory is
sufficient, and then execute the ajsqlattach command to re-attach the logical host that caused the error. If the
logical hosts are attached from the queueless cluster process, restart the JP1/AJS3 service on the logical host that
caused the error.
If you cannot correct the problem by taking the above actions, contact the system administrator, and then collect
data (see 1.2.3 To the system administrators).
Example: In this example, the command attaches the logical host Lhost.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
376