Specifications

For details about AJSQL_CLUSTERREQ, see 2.7 Setting up the queueless job execution environment in the Job
Management Partner 1/Automatic Job Management System 3 Configuration Guide 2.
(O)
If this message appears during command execution, correct the error and then re-execute the command.
If this message is output for the queueless cluster process, correct the error and then restart the JP1/AJS3 service on
the logical host that caused the error.
Example: In this example, the command attaches the logical host Lhost:
Execute the ajsqlattach command as follows:
ajsqlattach -h Lhost
For details on the ajsqlattach command, see ajsqlattach in 3. Commands Used for Special Operation in
the manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.
KAVS1954-E
The number of already registered logical hosts has reached the maximum, so additional registration is not possible.
A new logical host cannot be attached because the number of logical hosts attached to the queueless agent service has
reached the maximum, that is, 10.
(S)
Cancels command execution.
For the queueless cluster process, the system cancels the processing to attach the logical host. Then, by default, the
system continues startup processing without abnormally terminating the queueless cluster process.
If you want to abnormally terminate the queueless cluster process, specify error for the AJSQL_CLUSTERREQ
environment setting parameter.
For details about AJSQL_CLUSTERREQ, see 2.7 Setting up the queueless job execution environment in the Job
Management Partner 1/Automatic Job Management System 3 Configuration Guide 2.
(O)
Execute the ajsqldetach command to detach the logical host on which no queueless job is being executed, and
then execute the ajsqlattach command to re-attach the logical host that caused the error.
If the logical hosts are attached directly from the queueless cluster process, restart the JP1/AJS3 service on the logical
host that caused the error.
Examples:
• In this example, the command detaches the logical host Lhost.
Execute the ajsqldetach command as follows:
ajsqldetach -h Lhost
For details on the ajsqldetach command, see ajsqldetach in 3. Commands Used for Special
Operation in the manual Job Management Partner 1/Automatic Job Management System 3 Command
Reference 2.
• In this example, the command attaches the logical host Lhost.
Execute the ajsqldetach command as follows:
ajsqlattach -h Lhost
For details on the ajsqlattach command, see ajsqlattach in 3. Commands Used for Special Operation
in the manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
375