Specifications

KAVS1909-E
The queueless job (job-name) cannot be executed.
The queueless job cannot be executed. The possible causes are:
• The queueless job function has not been set up correctly.
• The maximum number of concurrently-executable queueless job request processes is set to 0.
(S)
Sets the status of the queueless job to Failed to start.
(O)
Use the ajsqlsetup command to set up the queueless job execution environment, and then restart the scheduler
service. If the QUEUELESSMULTIREQ environment setting parameter is set to 0, specify a value in the range from
1 to 8. Then, restart the scheduler service.
For details on the ajsqlsetup command, see ajsqlsetup in 3. Commands Used for Special Operation in the manual
Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.
KAVS1920-E
An error occurred during the starting of the queueless job request process (scheduler-service-name:identification-
number).: maintenance-information
An error occurred when the queueless job request process was started.
(S)
Stops the queueless job request process.
(O)
Determine the cause of the failure to start the queueless job request process according to the messages output before
and after this message. Then, take proper action.
KAVS1921-E
An attempt to connect with a queueless job execution agent (agent-name) failed.: maintenance-information
The system could not connect to the queueless job execution agent.
(S)
Sets the status of that job to Failed to start if the execution of a queueless job is requested.
If the status of a queueless job is inquired, the system sets the status of that job to Unknown end status.
If an operation on a job is requested, the system invalidates that operation.
(O)
Check that the queueless job execution agent has started correctly, and then re-execute the queueless job.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
368