Specifications

KAVS1887-E
Invalid data was received. (IPCID= IP-address)
The system received invalid data from the connection source shown in IP-address.
(S)
Continues processing.
(O)
Determine the connection source from the IP address, and check that the connection source does not have a problem.
KAVS1888-E
An error occurred during the reading of the passwd file.: maintenance-information-1 (maintenance-information-2)
An error occurred during a read from the password file.
(S)
Places the queueless job into Failed to start status.
(O)
Make sure that the OS user who is mapped during execution of the queueless job exists. Also make sure that
appropriate permission is set so that the user who started the queueless agent service can read the passwd file
(/etc/passwd). Then, re-execute the queueless job that resulted in the error.
This message is sometimes output if you register, delete, or change the password of an OS user while a job is starting
or finishing. In this scenario, re-execute the job after the OS user registration, deletion, or password change operation
has concluded.
You can avoid this problem altogether by setting the AJSQL_GETPASSWD_FTPRETRYINTERVAL or
AJSQL_GETPASSWD_AGTRETRYINTERVAL environment setting parameter. For details, see 15.2.20 Changing
the settings for retries when user information is acquired in the Job Management Partner 1/Automatic Job
Management System 3 Configuration Guide 1.
KAVS1889-E
An attempt to read the file (file-name) failed.: maintenance-information-1 (maintenance-information-2)
An attempt to read the file indicated in file-name has failed.
(S)
Places the queueless job into Failed to start status.
(O)
Correct the error as follows, and then re-execute the queueless job that resulted in the error.
• If No such file or directory is indicated in maintenance-information-1, the file indicated in file-
name does not exist. Make sure that the file indicated in file-name exists.
• If Permission denied is indicated in maintenance-information-1, an attempt to read the file indicated in
file-name has failed. Set appropriate permissions for the file and directory path so that the user who started the
queueless agent service and the mapped OS user can read the file indicated in file-name.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
361