Specifications

This message is sometimes output if you register, delete, or change the password of an OS user while a job is starting
or finishing. In this scenario, re-execute the job after the OS user registration, deletion, or password change operation
has concluded.
You can avoid this problem altogether by setting the AJSQL_GETPASSWD_FTPRETRYINTERVAL or
AJSQL_GETPASSWD_AGTRETRYINTERVAL environment setting parameter. For details, see 15.2.20 Changing
the settings for retries when user information is acquired in the Job Management Partner 1/Automatic Job
Management System 3 Configuration Guide 1.
KAVS1885-E
An attempt to open the file (file-name) failed.: maintenance-information-1 (maintenance-information-2)
An attempt to open the file indicated in file-name has failed.
(S)
• If a queueless agent service output this message during startup, the system cancels startup of the service.
• If this message is output during startup of a queueless job, the system places the queueless job into Failed to
start status.
• If this message is output during termination of a queueless job, the system places the queueless job into Ended
abnormally status.
(O)
Correct the error as follows, and then restart the queueless agent service or re-execute the queueless job that resulted
in the error.
• If No such file or directory is indicated in maintenance-information-1, make sure that the directory
path specified in the internal file in file-name exists.
• If Permission denied is indicated in maintenance-information-1, make sure that read and write
permissions for the directory path to the internal file indicated in file-name are set for the user who started the
queueless agent service and the OS user who executes the queueless job.
• If any message other than the above is indicated in maintenance-information-1, correct the error according to
the message. Also check the following probable causes, and then correct the error, if any.
If you cannot correct the problem by taking the above actions, contact the system administrator, and then collect
data (see 1.2.3 To the system administrators).
KAVS1886-E
A socket communication error occurred.:
maintenance-information-1 (maintenance-information-2, maintenance-
information-3)
An error occurred during socket communication.
(S)
Places the queueless job into Failed to start status if this message is output during execution of a queueless job. If
this message is output during execution of the command related to queueless job execution control, the system
terminates the command abnormally.
(O)
Take action according to the message output after this message.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
360