Specifications

A wait for a response timed out.
Possible causes are as follows:
• The CPU load on the host to be connected is very high.
• System resources are insufficient.
(S)
If the error occurred when an attempt was made to start the queueless job, the system places the queueless job
indicated in job-name into Failed to start status.
If the error occurred when an attempt was made to terminate the queueless job, the system places the queueless job
indicated in job-name into ended abnormally status. However, if 1 is specified for the
IgnoreResultFileError environment setting parameter, the system places the queueless job indicated in
job-name into the Ended normally, Ended with warning, or Ended abnormally status based on the end judgment.
(O)
Check the load on the destination host or the limits on system resources indicated by the kernel parameter settings.
Then, if necessary, re-execute the job indicated in job-name that caused the error.
If the problem cannot be corrected, contact the system administrator, and then collect data (see 1.2.3 To the system
administrators).
Note:
If the KAVS1859-W message was output before or after this message, an error occurred while transferring the
result file. If 1 is specified for the IgnoreResultFileError environment setting parameter, any error that
occurs while transferring the result file is ignored. Accordingly, you cannot use the Execution Result Details
dialog box of JP1/AJS3 - View to view the contents of the standard error output file.
KAVS1833-E
An error occurred in the standard input file (file-name).: maintenance-information-1 (maintenance-information-2)
An error occurred during access to the standard input file.
(S)
Places the queueless job indicated in job-name into Failed to start status.
(O)
Correct the error as follows, and then re-execute the queueless job that resulted in the error.
• If No such file or directory is indicated in maintenance-information-1, the standard input file
indicated in file-name does not exist. Make sure that the standard input file indicated in file-name exists, and
then re-execute the job.
• If Permission denied is indicated in maintenance-information-1, an attempt to read the standard input file
indicated in file-name has failed. Set appropriate permissions for the file and directory path so that the mapped
OS user can read the standard input file indicated in file-name. Then re-execute the job.
• If any message other than the above is indicated in maintenance-information-1, correct the error according to
the message.
If you cannot correct the problem by taking the above actions, contact the system administrator, and then collect
data (see 1.2.3 To the system administrators).
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
341