Specifications

• Standard input file name: 767 bytes
• Standard output file name: 767 bytes
• Standard error output file name: 767 bytes
(S)
Places the queueless job indicated in job-name into Failed to start status.
(O)
Edit the job definition so that the lengths of the items do not exceed their maximums after substitutions for the
variables, and then re-execute the queueless job indicated in job-name that resulted in the error
KAVS1831-E
An attempt to attach the logical host (logical-host) has failed.
An attempt to attach the logical host indicated in logical-host failed when the queueless agent service was started, when
the ajsqlattach command was executed, or when a queueless cluster process was started.
(S)
The queueless agent service cancels processing for attaching the logical host, and continues processing.
The system terminates the ajsqlattach command abnormally.
For the queueless cluster process, the system cancels the processing to attach the logical host. Then, by default, the
system continues startup processing without abnormally terminating the queueless cluster process.
If you want to abnormally terminate the queueless cluster process, specify error for the AJSQL_CLUSTERREQ
environment setting parameter.
For details about AJSQL_CLUSTERREQ, see 2.7 Setting up the queueless job execution environment in the Job
Management Partner 1/Automatic Job Management System 3 Configuration Guide 2.
(O)
The probable causes are that the shared disk is not mounted or disk space is insufficient. Take action according to
the message that was output to the integrated trace log before or after this message.
After correcting the error, execute the ajsqlattach command to re-attach the logical host that resulted in the
error.
If this message appears during startup of a queueless cluster process, correct the error, and then restart the JP1/AJS3
service and re-attach the logical host that resulted in the error.
Example: In this example, the command attaches the logical host.
Execute the ajsqlattach command as follows:
ajsqlattach -h Lhost
For details on the ajsqlattach command, see ajsqlattach in 3. Commands Used for Special Operation in
the manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.
KAVS1832-E
Reception processing timed out during TCP/IP communication. (
name-of-host-to-be-connected, job-name,
maintenance-information)
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
340