Specifications

write to the work path indicated in path-name. Then, re-execute the queueless job indicated in job-name that resulted
in the error.
KAVS1820-E
Memory is insufficient, so the job (job-name) cannot be executed.
The queueless job indicated in job-name cannot be executed because of insufficient memory.
(S)
Places the queueless job indicated in job-name into Failed to start status.
(O)
Check the amount of memory available by using Task Manager in Windows or the top command or another means
in UNIX.
Wait until the memory necessary for executing the queueless job indicated in job-name that resulted in the error can
be allocated, and then re-execute the queueless job.
KAVS1821-E
An iconv_open error occurred, so character conversion is not possible.: maintenance-information-1 (maintenance-
information-2)
The system does not convert the character set because it could not make preparations for character set conversion.
(S)
Continues processing.
(O)
To convert the character sets, check the character settings and then restart the queueless agent.
KAVS1822-E
The file (file-name) does not exist on the transmission source host (host-name), so the job (job-name) cannot be
executed.
The queueless job indicated in job-name cannot be executed because the file indicated in file-name does not exist on
the manager host indicated in host-name.
(S)
Places the queueless job indicated in job-name into Failed to start status.
(O)
Take either of the following actions, and then re-execute the queueless job indicated by job-name that resulted in
the error:
• Make sure that the file to be transferred (file-name) exists on the transmission source host (host-name).
• Make sure that the name of the file to be transferred (file-name) has no more than 254 characters (if the job is a
PC job).
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
336