Specifications

(O)
Execute the ajsqlattach command to attach the host indicated in host-name, and then re-execute the queueless
job indicated in job-name that resulted in the error.
Example: In this example, the command attaches the logical host Lhost.
Execute the ajsqlattach command as follows:
ajsqlattach -h Lhost
For details on the ajsqlattach command, see ajsqlattach in 3. Commands Used for Special Operation in the
manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.
KAVS1810-E
The specified class (class-name) does not exist, so the job (job-name) cannot be accepted.
The queueless job indicated in job-name cannot be accepted because the class indicated in class-name does not exist.
(S)
Places the queueless job indicated in job-name into Failed to start status.
(O)
Take the following actions:
• Check whether the correct host name and class name are specified for Execution agent. Correct the invalid host
name or class name, and then re-execute the queueless job indicated in job-name that resulted in the error.
• Execute the ajsqlstatus command to make sure that the class indicated in class-name is on the host specified
for Execution agent.
Example: In this example, the command outputs detailed information for the logical host Lhost.
Execute the ajsqlstatus command as follows:
ajsqlstatus -h Lhost
For details on the ajsqlstatus command, see ajsqlstatus in 3. Commands Used for Special Operation in the
manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 2.
• If the class indicated in class-name does not exist, create the class and then re-execute the queueless job indicated
in job-name that resulted in the error. For details about how to create a class, see 6.4.1 Executing jobs with a
class specified in a queueless job environment in the Job Management Partner 1/Automatic Job Management
System 3 Configuration Guide 1 (for Windows) or 15.4.1 Executing jobs with a class specified in a queueless
job environment in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide
1 (for UNIX).
KAVS1811-E
Memory is insufficient, so the job (
job-name) cannot be accepted.
The queueless job indicated in job-name cannot be accepted due to insufficient memory.
(S)
Places the queueless job indicated in job-name into Failed to start status.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
330