Specifications

KAVS1516-E
Construction is invalid.(maintenance-information)
The configuration is invalid. The probable causes are:
• The installation or migration of JP1/AJS3 might not have finished.
• The value of the DEFLENTYPE environment setting parameter is different from the value of DEFLENTYPE in
shared memory.
• The value of the DEFLENTYPE environment setting parameter does not match the format of the scheduler service
database.
• The value of the AJSCHARCODE environment setting parameter is invalid.
(S)
Cancels processing.
(O)
Specify the following configuration, and then re-execute the operation.
If JP1/AJS3 installation or migration is not yet finished:
Re-install JP1/AJS3, or confirm that JP1/AJS3 has been migrated correctly.
If the value of the DEFLENTYPE environment setting parameter is different from the value of DEFLENTYPE in
shared memory:
Check whether the value of the DEFLENTYPE environment setting parameter matches the value of the currently
operating DEFLENTYPE environment setting parameter returned by entering the jajs_status command. If
the values do not match, take either of the following actions:
• Restart the relevant scheduler service.
• Stop the JP1/AJS3 services on all the configured hosts. In UNIX, stop the JP1/AJS3 services on all the
configured hosts, and then execute the ajsshmdel command to delete the shared memory information.
The path to the ajsshmdel command is /opt/jp1ajs2/bin/ajsshmdel.
The following are examples of executing the command:
For sh:
/opt/jp1ajs2/bin/ajsshmdel >/dev/null 2>&1
For csh:
/opt/jp1ajs2/bin/ajsshmdel >&/dev/null
If the value of the DEFLENTYPE environment setting parameter does not match the format of the scheduler service
database:
Check the value of the DEFLENTYPE environment setting parameter.
• If byte is specified for the DEFLENTYPE environment setting parameter.
Execute the ajsembdbsetup command with the -del option specified to delete the database
environment. Then execute the ajsembdbsetup command to set up the database environment again.
• If sjis is specified for the DEFLENTYPE environment setting parameter.
Execute the ajsembdbsetup command with the -del option specified to delete the database
environment. Then execute the ajsembdbsetup command with the -e sjis option to set up the
database environment again.
Note that if the database environment is deleted by executing the ajsembdbsetup command with the-del
option specified, the unit definition defined in the scheduler service and information about execution results are
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
304