Specifications

(O)
Specify the option value correctly, and then re-execute the command.
In addition, change the value of the environment setting parameter indicated in parameter-name, and then re-execute
the command.
• When the environment setting parameter indicated in parameter-name is "MAXSAVEGEN"
Check and, if necessary, change the value of the MAXSAVEGEN environment setting parameter. For details on
the settings, see 2.2 Setting up the scheduler service environment in the Job Management Partner 1/Automatic
Job Management System 3 Configuration Guide 2.
KAVS1300-I
An attempt to obtain a host name failed.: maintenance-information-1, maintenance-information-2, maintenance-
information-3
The host name could not be obtained.
(S)
Continues processing.
(O)
Check the execution target host (setting of the JP1_HOSTNAME environment variable, for example).
KAVS1301-I
An attempt to obtain the name of the directory for backup information failed.: maintenance-information-1,
maintenance-information-2, maintenance-information-3
The directory name for output of the wait information file could not be obtained.
(S)
Continues processing.
(O)
Check the following:
• Check whether system resources are sufficient.
• Check whether the permission environment of the started user is correct.
• Check whether the directory created at JP1/AJS3 installation was unintentionally deleted.
KAVS1302-I
An attempt to obtain the name of the directory for installation of JP1/AJS2 failed.:
maintenance-information-1,
maintenance-information-2, maintenance-information-3
The JP1/AJS3 installation directory name could not be obtained.
(S)
Continues processing.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
299