Specifications

(P)
Programmer action at message output
(O)
Operator action at message output
Action
Action that the embedded database system administrator must take when the message is received.
#
Output destination of the message. For details, see 1.3.7 Output destinations of messages beginning with KFP.
(4) Messages beginning with KNA
Messages beginning with KNA are explained in the following format in this manual. Characters in italic vary each time
the system displays a message. Messages are explained in the ascending order of message IDs. The following shows a
message explanation example.
Message ID
Message text: message text
Explanation of the output message text.
(S)
System action
(O)
Operator action at message output
1.2.3 To the system administrators
If an error occurs during operation, collect log information according to the manual Job Management Partner 1/
Automatic Job Management System 3 Troubleshooting, and conduct in an initial check.
To conduct initial check to find the cause of the error, see the log information for the operating system (Windows event
logs in Windows and syslogs in UNIX) and log information output by JP1/AJS3. Prevent the error and take corrective
actions according to the contents of the log information when the error occurred.
In addition, record the operation that caused the error. If possible, check whether the same error occurs repeatedly.
JP1/AJS3 outputs the messages related to the JP1/Base process monitor. When monitoring troubles in JP1/AJS3, also
see the messages related to the JP1/Base process monitor.
1. Overview of JP1/AJS3 Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
29