Specifications

In UNIX, use the jajs_spmd_status command to make sure that the JP1/AJS3 service has stopped. After
making sure that the services have stopped, go to step 3.
3. Execute the ajsshmdel command.
4. Restart JP1/AJS3.
For details on the ajsshmdel command, see 15.1.1 Settings for starting multiple scheduler services in the Job
Management Partner 1/Automatic Job Management System 3 Configuration Guide 1.
KAVS1007-E
Host name cannot be resolved. (logical-host-name)
The logical host name could not be resolved.
(S)
Cancels processing.
(O)
Check the settings of the JP1_HOSTNAME environment variable or the hosts file to resolve the logical host name,
and then retry.
KAVS1008-E
An error exists in the certification server setting of the host (host-name). (login point IP address: IP-address)
The settings of the certification server contain an error on the host at the connection destination indicated in IP-address.
(S)
Terminates processing.
(O)
Recheck the settings of the certification server on the host at the connection destination, and correct the errors. In
addition, check whether the IP address of the connection (login) destination matches that of the host that you
attempted to connect to.
KAVS1009-W
The connection from host (IP address:
IP-address, JP1 user name:JP1-user-name) to host (logical-host) was
refused.
A connection being established from the host indicated in IP-address to the host indicated in logical-host was refused
because user mapping or user authentication in JP1/Base performed for the user indicated in JP1-user-name failed.
(S)
Cancels the connection and waits for the next request.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
283