Specifications

(O)
The schema has already been defined, so you do not need to use the ajssetup command to set up the schema
again. If you want to discard and re-create the existing schema, delete it on the DBMS and then re-execute the
ajssetup command.
KAVS0940-E
Event Action Manager is busy.: maintenance-information maintenance-information maintenance-information
maintenance-information
The event/action control manager is busy status. Events cannot be processed.
(S)
Cancels operations for event monitoring and start conditions.
(O)
Wait a while and then retry. If the retry does not correct the error, collect data and then contact the system
administrator (see 1.2.3 To the system administrators).
KAVS0941-E
No event job in start condition.: jobnet-name
An attempt was made to start the execution of a jobnet whose icon was not registered in the start condition.
(S)
Cancels monitoring of the jobnet.
(O)
Define the event icon in the start condition or delete the start condition.
KAVS0942-W
Connection to job status notification process has been reset.
The status report process was disconnected because the status report process stopped during communication with the
job-completion wait process.
(S)
Stops the scheduler service.
(O)
If the KAVU6101-I message is output before and after this message, this message is output at the end of the status
report process and there is no problem. If the KAVU6101-I message is not output before and after this message,
collect the internal trace log and then contact the system administrator.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
272