Specifications

Action
Check the estimated file size in the kernel parameter, and set the appropriate value. For details about estimating
the kernel parameters, see Release Notes.
Cause 7
The size of the ISAM file used for the scheduler database or job execution environment database reached 2 GB.
Action
Decrease the size of the ISAM file according to 9.3 Notes on the JP1/AJS3 database in the Job Management
Partner 1/Automatic Job Management System 3 System Design (Configuration) Guide.
Cause 8
Database files were corrupted because the OS was stopped unexpectedly due to power interruption while JP1/
AJS3 was running or for any other reason.
Action
Same as for Cause 1.
Cause 9
If an access from JP1/AJS3 - View causes an error, the OS user who is mapped to the JP1 user who logs in to
JP1/AJS3 - View does not have update permission for the scheduler database.
Action
Check permission for accessing the scheduler database directory and scheduler database files, and set the access
permissions appropriately.
Cause 10
If an embedded database is used for the scheduler database, the embedded database is not running.
Action
Start the embedded database, and then restart the scheduler service that is using the embedded database as the
scheduler database.
Cause 11
When an unexpected failover occurs in a cluster configuration due to OS power failure or OS error, the status
of ISAM files becomes inconsistent.
Action
Same as for Cause 1.
Cause 12
The embedded database was disconnected during operation of JP1/AJS3.
Action
If the KNAC1520-I message was output immediately after this message, there is no problem despite the reported
error. If the ajsagtadd, ajsagtalt, or ajsagtdel command terminated abnormally, make sure that the
embedded database is running, and then re-execute the command. If a job terminated abnormally when the agent
automatic definition function was being used, make sure that the embedded database is running, and then re-
execute the job.
KAVS0933-W
RDBUSER (
user-name) has connect privilege.
The user specified in the RDBUSER environment setting parameter has sufficient privileges to connect to the database.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
270