Specifications

An error that allows processing to continue occurred.
(S)
Continues processing.
(O)
If the maintenance information contains the character string SPMD communication error, check whether the
jajs_spmd process is operating normally.
This error message might be output when a system error occurs and the jajs_spmd process terminates first. In such
a case, there is no problem with the operation, despite the output of the message.
For any other case, follow the instructions given in the messages output before and after this one.
KAVS0901-E
I/O error occurred.: maintenance-information-1 maintenance-information-2 maintenance-information-3
An I/O error occurred during processing such as inputting into or outputting from a file.
(S)
Cancels the processing for the file where the error occurred, and continues the process. If the I/O error of the system
file prevented processing, the system cancels the process.
(O)
Take action according to the error information in the Windows event log or syslog output by the OS, and other OS-
specific error information. If you cannot take corrective action, contact the system administrator, and collect data
(see 1.2.3 To the system administrators).
KAVS0902-E
Insufficient memory occurred.: maintenance-information-1 maintenance-information-2 maintenance-
information-3
A memory shortage occurred. If the KFPA11912-E message is indicated in the maintenance information, the system
load is excessive because either too many processes are running concurrently, or the value of pd_lck_pool_size
for the embedded database is too small.
(S)
Cancels the processing during which insufficient memory was detected. If insufficient memory was detected during
allocation of memory for a key component that could not continue processing, the system aborts the process.
(O)
Check the following settings:
• In UNIX, see Release Notes, and make sure that the value of the kernel parameter for memory is greater than
the estimated value.
• Check the status of the process that was running when the error occurred to make sure that the amount of memory
available is greater than the estimated value.
• If the KFPA11912-E message is indicated in the maintenance information, specify yes for the
UNITDEFDIVIDEUPDATE environment setting parameter to divide the data into several blocks that can then
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
263