Specifications

The jobnet is being executed. It cannot be re-executed for suspending.
(S)
Cancels command execution.
(O)
Wait for the jobnet to complete the execution, and then re-execute the command.
KAVS0764-E
Specified Unit (unit-name) cannot rerun.
The unit cannot be re-executed. The probable causes are:
• The status of the job or nested jobnet that you attempted to rerun is one of the following: Now running, Running
+ Abend, Running + Warning, Wait for prev. to end, Wait for start time, or Being
held.
• The job or the nested jobnet that you attempted to rerun has the recovery attribute, and the status of the preceding
job or jobnet is Ended normally or Ended with warning.
• The job or the nested jobnet that you attempted to rerun is a judgment job or a dependent unit of a judgment job.
• The upper-level jobnet of the job or the nested job that you attempted to rerun has no schedule.
(S)
Cancels command execution.
(O)
Make sure that the unit is in a status that allows re-execution, and then re-execute the command.
For details on re-execution, see 9.11 Re-executing jobnets and jobs in the Job Management Partner 1/Automatic
Job Management System 3 Operator's Guide.
KAVS0771-E
Job (unit-name) condition verify error.
The status of the job does not match the condition. The probable causes are:
• Although exit is specified in the -t option, the return code is not set.
• The status of the unit differs from the status specified in the -v option.
• he combination of statuses is indicated as impossible to change in Table 2-3 or Table 2-4 in ajschgstat in 2.
Commands in the manual Job Management Partner 1/Automatic Job Management System 3 Command Reference 1.
(S)
Cancels command execution.
(O)
Correct the condition, and then re-execute the command.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
247