Specifications
When a unit under a planning group is specified
You executed a command on an active unit automatically selected from under a planning group, but the target
generation could not be found.
The probable causes are as follows:
• When executing the ajsplan command, there is no unit to execute for the next time.
• When executing the ajskill, ajsintrpt, ajschgstat, or ajsrerun command, there is no unit that
has started execution.
The target generation was lost during command processing because of one of the following reasons:
1. The target generation was deleted because the number of logs to keep was specified.
2. The execution has stopped.
3. The target generation was unregistered.
Use the following methods to execute commands on automatically selected units:
• Execute the command with yes or auto specified for the -X option and specify the unit name with the root
jobnet name omitted under the planning group.
• Execute the command with YES or AUTO specified for the AJSAUTOJUDGE environment variable and specify
the unit name with the root jobnet name omitted under the planning group.
• Execute the command without the -X option or the AJSAUTOJUDGE environment variable specified, and
specify the unit name with the root jobnet name omitted under the planning group.
(S)
Cancels command execution. If you specify more than one unit, the system continues processing of the units of the
other jobnets.
(O)
Check the status of the target unit, and then re-execute the command.
KAVS0710-E
There is no permission for the Unit ID (unit-ID).
You do not have permissions for the unit with the specified unit ID.
The probable causes are:
• You do not have permissions for the unit with the specified unit ID.
• You do not have reference permissions for units above the unit with the specified unit ID.
(S)
Cancels command execution. If you specify more than one unit ID, the system continues processing of another unit
ID.
(O)
Execute the command as a user who has permissions for the unit with the unit ID.
KAVS0711-E
There is an error in the specified Unit ID (
unit-ID).
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
242