Specifications

The probable causes are:
• When end judgment for a job was to be performed in a range of condition values, the range to be used as the judgment
condition was not specified.
• When monitoring is set to monitor logs of a type other than the any-log-type (when parameters other than oth are
set for the unit definition parameter ntlgt) for the Windows event-log monitoring job, a log type is specified for any-
log-type as the monitoring condition.
• When a log type was specified for any-log-type for the Windows event-log monitoring job, log type was not specified
as the monitoring condition.
• When automatic retrying of jobs that end abnormally was disabled, a parameter was specified that enables retrying.
(S)
Cancels command execution.
(O)
Check the unit definition parameters, and then re-execute the command.
For details about the unit definition file, see 4.1 Creating a unit definition file in the manual Job Management Partner
1/Automatic Job Management System 3 Command Reference 2.
KAVS0681-E
Jobnet (jobnet-name) already registered.
The jobnet has already been registered.
(S)
Cancels command execution.
(O)
Specify another jobnet, and then re-execute the command.
KAVS0682-E
Registerable Jobnet number exceeds the limit.
The number of jobnets to be registered exceeded the limit.
(S)
Cancels command execution.
(O)
Unregister unnecessary jobnets, and then retry.
KAVS0683-E
Specified Jobnet (
jobnet-name) cannot be registered.
The jobnet cannot be registered because of the following reasons:
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
237