Specifications

KAVC6111-E
The host name of the monitoring destination could not be resolved.
The system cannot display the status because JP1/AJS3 Console Manager at the connection destination cannot determine
the host name specified in the monitored-host's name in the Define Details dialog box.
(S)
Sets Unknown as the status of the object and continues processing.
(O)
In the monitored-host's name in the Define Details dialog box, specify a host name that JP1/AJS3 Console Manager
can determine. Alternatively, specify settings so that JP1/AJS3 Console Manager at the connection destination can
determine the specified host name.
KAVC6112-E
Cannot connect to the monitoring destination.
The system cannot display the status because JP1/AJS3 Console Manager at the connection destination cannot connect
to the monitored host or to the JP1/AJS3 Console Agent host on the monitored host. The probable causes are:
• The JP1/AJS3 Console Agent service on the monitoring destination host has not started.
• The definitions of the port number (jp1ajs2ca) do not match between the connection destination and the
monitoring destination.
• The host at the monitoring destination has not started.
• The connection destination host and the monitoring destination host are in a state that prevents a network connection.
• If a firewall is provided between the connection destination host and the monitoring destination host, it has not been
set to allow the access.
(S)
Sets Unknown as the status of the object and continues processing.
(O)
Correct the cause of the error.
KAVC6113-E
A timeout occurred while waiting for the response from the monitoring destination.
The system cannot display the status because a timeout error occurred in JP1/AJS3 Console Manager at the connection
destination that was waiting for a response from JP1/AJS3 Console Agent at the monitoring destination. Alternatively,
the system could not perform the operation.
(S)
Sets Unknown as the status of the object and continues processing if the error occurred during status acquisition. If
the error occurred during an operation, the system determines that the operation is an error and continues processing.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
169