Specifications

KAVC4641-E
Moving is not possible because the cut business scope and paste destination business scope are the same.
The object does not move because the cutting business scope and the pasting business scope are the same.
(S)
Cancels processing.
(O)
Paste the object to a business scope different from the cutting business scope.
KAVC4642-E
A business scope cannot be moved to a lower hierarchy level.
The user cannot paste a cut business scope to a lower hierarchy level.
(S)
Continues the pasting process until an error is detected.
(O)
Paste the cut business scope to an upper hierarchy level or to another hierarchy level.
KAVC4643-E
The (operation-level) is not possible because the monitoring status is not "Monitoring".
The user cannot perform the operation because the monitoring status at the connection destination is not Monitoring
status.
(S)
Cancels processing.
(O)
Re-execute the operation after the monitoring status indication on the mode panel changes to Monitoring status.
KAVC4644-E
The (
operation-name) is not possible because the status has not been obtained.
The user cannot perform the operation because the status of the target object being monitored is Unknown or No
status.
(S)
Cancels processing.
(O)
Re-execute the operation after the status of the target object is obtained correctly.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
166