Specifications

(S)
Cancels processing.
(O)
A temporary network problem may have occurred. If this message appears during update of definition information,
check whether the definition information has been updated. If it has not been updated successfully, re-execute the
same operation.
If this message appears frequently, an error may have occurred in JP1/AJS3 Console Manager.
Use log information such as the Windows event log or the syslog on the host for JP1/AJS3 Console Manager to
examine the error. Then, correct the cause of the error according to the results of the search.
KAVC4503-E
Processing was interrupted because an error was detected in the received data. Confirm that the port number
(jp1ajs2cm) is the same at the connection destination.
Detailed information [(maintenance-information)]
The system detected invalid data related to the protocol in received data.
(S)
Cancels processing.
(O)
Check whether the definition of the port number (jp1ajs2cm) matches that on the connection destination.
KAVC4504-E
The host name is specified incorrectly.
The host name specified in connected-host-name can not be resolved.
(S)
Cancels processing.
(O)
Enter the correct host name or IP address.
KAVC4505-E
Cannot connect because the number of connections exceeded the maximum.
No more connections can be made because the number of connections to JP1/AJS3 Console Manager exceeded the
maximum.
(S)
Cancels processing.
(O)
Wait until the number of connections drops below the maximum, and then reconnect.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
140