Specifications

KAVC4115-I
An error occurred, so an operation was not processed.
This message indicates that the operation that was attempted before the message appears was skipped due to an error.
(S)
Informs that the operation attempted before this message appears has been skipped due to an error. After sending
this information, the system displays information defined in JP1/AJS3 Console Manager.
(O)
If this message appears while you are updating definition information, determine the updated part of the information
based on the definition information currently displayed in the window. If this message appears while you are
performing some other operation, re-execute, skipped the operation as required.
If this message appears immediately after you click the Yes button in a KAVCnnnn-Q message which requires the
user's confirmation, an error message indicating the cause of the error may not appear. To determine the cause of
the error, see error messages in the JP1/AJS3 Console View log file (ajs2coview#nnnn_{1|2}.log
#1
) that
were output at and after the time when the KAVCnnnn-Q message was displayed.
#1
#nnnn_ is not displayed when a single unit of JP1/AJS3 Console View is running. If more than one unit are running,
any number from 0001 to 9999 is assigned to nnn.
KAVC4116-I
The connection was severed, so an operation was not processed.
This message indicates that the operation that was attempted before the message appeared was skipped because
disconnection from JP1/AJS3 Console Manager was detected during processing.
(S)
Reports that the operation that was attempted before this message was not processed because disconnection from
JP1/AJS3 Console Manager was detected. Unless automatic reconnection is prohibited, the system reconnects to
JP1/AJS3 Console Manager and displays information defined in the currently active JP1/AJS3 Console Manager.
The system, however, does not reconnect to JP1/AJS3 Console Manager if it detects disconnection during mode
change or reconnection.
(O)
If this message appears while you are updating definition information, determine the updated part of the information
based on the definition information currently displayed in the window.
If the message The connection was severed appears on the status bar in the Scope window, you can resume
the connection by choosing File and then Reconnect in the Main Scope window.
KAVC4117-W
An attempt to read the setting file ((
file-name)) failed. [(maintenance-information)]
This message indicates that the setting file could not be read.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
133