Specifications

The same parameter was specified more than once in the ajscon command.
(S)
Terminates JP1/AJS3 Console View.
(O)
Delete the duplicate parameter, and then re-execute the command.
KAVC4015-E
The port number could not be obtained. Confirm whether the service name is defined correctly.
The port number to connect to JP1/AJS3 Console Manager could not be obtained.
(S)
Terminates JP1/AJS3 Console View.
(O)
Check whether the correct service name and the correct port number of jp1ajs2cm are specified in the services
file. If the port number is defined correctly, memory or free space on the disk may be insufficient. Terminate
unnecessary applications, and then restart JP1/AJS3 Console View.
KAVC4016-E
JP1/AJS3 Console View cannot be used because it has not been set up.
JP1/AJS3 Console View cannot start because JP1/AJS3 Console View has not been set up.
(S)
Cancels processing.
(O)
Set up JP1/AJS3 Console View.
KAVC4017-E
Setup cannot be executed because the installation was incorrect.
Setup cannot be executed because JP1/AJS3 - View has not been installed correctly.
(S)
Cancels processing.
(O)
The configuration of JP1/AJS3 - View may have been corrupted. Perform a repair installation.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
127