Specifications

No more connections can be made because the number of connections from JP1/AJS3 Console Manager exceeded the
value specified in the MAXSESSION environment setting parameter.
(S)
Continues processing, determining any connection exceeding the maximum to be an error.
(O)
If JP1/AJS3 Console View monitors hosts on the machine unnecessarily, terminate JP1/AJS3 Console View. If
necessary, respecify a value in MAXSESSION.
KAVC2457-E
Cannot connect to host. maintenance-information
Since a connection to hosts is restricted, the host to be connected cannot be identified on JP1/AJS3 Console Agent when
JP1/AJS3 Console Manager is connected to JP1/AJS3 Console Agent.
(S)
Continues processing, determining the connection from JP1/AJS3 Console Manager to be an error.
(O)
Check whether the correct host name is specified in the AJS2 unit monitored object. In an environment in which
two or more LANs are connected, check the JP1/Base settings for error.
KAVC2532-I
Reception processing from JP1/AJS2 Console Manager has started. (From: IP-address, To: logical-host-name,
PID: process-ID)
Processing that accepted a connection from JP1/AJS3 Console Manager starts. The process from the IP address indicated
by From was accepted at the logical host indicated by To, and the processing indicated by PID has started.
(S)
Continues processing.
KAVC2533-I
Reception processing from JP1/AJS2 Console Manager has ended.
process-information
A connection request from JP1/AJS3 Console Manager was accepted, so processing for JP1/AJS3 Console Agent is
terminated.
(S)
Terminates processing accepted from JP1/AJS3 Console Manager.
2. Messages
Job Management Partner 1/Automatic Job Management System 3 Messages 1
117