Technical data

MEASURING AND TESTING EQUIPMENT
894
15
OVEN AND TESTING CHAMBER
GT-7006-V
VERTICAL TYPE FREEZING TESTER ASTM-D1790, D1593, JIS-K6545
This tester is especially used to test the bending/exing durability of
rubber materials, under the specied cold environment
Specication
Model GT-7006-V 30 GT-7006-V 50
Temp. Range Room Temp.~ -30°C Room Temp.~ -50°C
Interior (WxDxH) (cm) 50 x 50 x 60
Temp. Acurracy (°C) ± 0.5
Cooling Down Within 60 Min. (Approx)
Refrigerantion System
Single Stage, Hermetic
Compressor
Hermetic Compressor, Cascade
Refrigeration System
Refrigerant With Environmental Protection
Inner Chamber/Grips
Stainless Steel
(Interior: Imported Frosty Stainless Steel)
Insulation (To Keep Warm)
Hard Polyurethane Foam
Temp. Control Sspr Balancing System with PID Control
Temp. Controller LED Display
Counter LCD, 0~999,999
Viewing windows (WxD) 35.5 x 31.5 cm, 3-layer Vacuum Glasses
Inner Lamp PL Lamp, 13W
Dimension (WxDxH) (cm) 105 x 89 x 151
Weight (kg) 400 420
Power (approx.) 1ph, AC 220V
Current (A) 28 40
Order No. Type Description
KH0000025 GT-7006-V 30 Vertical Type Freezing Tester
KH0000026 GT-7006-V 50 Vertical Type Freezing Tester
GT-7005-A
PROGRAMMABLE TEMPERATURE AND HUMIDITY TESTER
Specication
Model GT-7005-A7M GT-7005-A4S GT-7005-A2M
System Balanced Temperature and Humidity Control System
Temp. Range
-70 ~ +100°C
(+150°C Optional)
-40 ~ +100°C
(+150°C Optional)
-20 ~ +100°C
(+150°C Optional)
Humid. Range 20 ~ 98% R.H
Temp. Accuracy (°C) ±0.3°C
Humid. Accuracy ±2.5% R.H
Heating Up
-70 ~ +100°C Within 60
Min.
-40 ~ +100°C Within
45 Nin.
-20 ~ +100°C
Within 35 Min.
Cooling Down +20 ~ -70°C Within 90 Min.
+20 ~ -40°C Within
50 Min.
+20 ~ -20°C
Within 45 Min.
Int. Dimension (WxDxH) 50 x 75 x 60cm 50 x 60 x 50cm 50 x 75 x 60cm
Ext. Dimension
(WxDxH) (cm)
108 x 162 x 112 108 x 147 x 102 108 x 162 x 112
Interior Materials Stainless Steel Plate (SUS 304)
Exterior Materilas Stainless Steel Plate (SUS 304)
Insulation Rigid Polyurethane Foam (Glass Wool at 150°C)
Refrigeration
System
Air Cooled, Hermetic
Compressor, Cascade
Refrigeration System
Air Cooled, Hermetic Compressor,
Single Stage Refrigeration System
Safety Devices
No Fuse Breaker, Refrigerator Over Load Relay, Refrigration High Pres-
sure Switch, Over Temp, Protector, Protection Relay, Protection Fuse,
Water Lever Protector, Overheat Protector, Alarm
Accessories
Viewing Window, Shelves (Freely Adjustable 2pcs) Cable Port (ø 50mm)
Chamber Lamp
Weight (kg) 330 250 290
Power 3ph, AC220V ±10%, 60Hz 3ph, AC 380V/415±10%, 50Hz
Order No. Type Description
KH0000024 GT-7005-A7M Programmable
Temperature
and Humidity
Tester
KH0000362 GT-7005-A4S
KH0000024 GT-7005-A2M
This is also called environment tester for testing functions of heat endurance, cold-endurance, drought-endurance, wet-endurance, which is
suitable for quality control of electronics, electric appliance food stus, automobiles, metal, chemicals plywood, etc..
REGULAR FLEXING / BENDING ACCESSORIES
GT-7006-1 (Striker) GT-7006-10 (Ross Flexing(8 sets))
Purpose
Strike Specimen For
Inspection Of Cracks
Dimensiom 35.5 x 10.3 x 12cm
Weight 9 kg
Ref. spec. ASTM-D1593
Sampling
Ross Flexing :16Pcs
Flexing Angle 90
0
Counter 1Piece