Technical data

www.kawanlama.com
893
MEASURING AND TESTING EQUIPMENT
OVEN AND TESTING CHAMBER
GT-7040-L
OIL BATH
ISO-1817, ASTM-D471, DIN-53521
Specially test the heat-endurance of rubber products such as oil seal,
oil-protection coil under oily environment.
Specication
Model GT-7040-L
Temp. Room Temp. ~300
o
C
Test Cup 6Sets
Mixer Motor 40W
Interior (cm) 26 x 18 x 28.5
Dimension (WxDxH cm)) 51 x 35 x 55.5
Weight (kg) 47
Power 1 , AC 220 V, 12A
∫
This tester is designed to
provide an auto-controlled
ozone concentration
environment for determining
the ozone resistance
performance of rubber. It
adopts the ultraviolet rays
absorption principle to design
the monitor and bases on
the Bill-Brown Law to inspect
the ozone concentration
automatically with chemical
free.
OZ-0500
OZONE TESTER
ASTM-D11149, D1171
Specication
Model Oz-0500
Ozone Monitor Ultraviolet Ray Absorption
Ozone Range (pphm) 0 ~ 1000
Accuracy 3% of Reading, 4% Of Set-Point
Temp. Range (
0
C) 20 ~ 90
Temp. Accuracy (
0
C) + 2
Ozone Generator Ultraviolet Rays
Display Device Instant Monitor Of Digital Type
Interior (WxDxH cm)) 60 X 50 X 50
Dimension (WxDxH cm)) 121 X 68 X 175
Power 1 , 220v, 15A
Accessories Static/Dynamic Grips: 6 ets (Optional)
Order No. Type Description
KH0000058 GT-7040-L Oil Bath
Order No. Type Description
KH0000023 OZ-0500 Ozone Tester
GT-7004-M
SALT SPRAY TESTER
ISO-9227, STM-B117, JIS-D0201, H8502, H8610, Z2371, GB/T10125
The Salt Spray Tester is used to test the anti erosion quality of the surface of all
materials after the rust-proof of painting, coating, electroplating, anoding and
rust-proof of greasing.
Specication
Test Chamber 270l
Temp
Test NSS.ACSS 35°C ± 1°C / CASS 50°C ± 1°C
Air NSS.ACSS 47°C ± 1°C / CASS 63°C ± 1°C
Interior Dimension (WxDxH) (cm) 90 x 60 x 50
Test Water (l) 25
Dimension (WxDxH) (cm) 153 x 93 x 130
Weight (kg) 92
Power 1ph, AC 220V, 20A
Order No. Type Description
KH0000023 GT-7004-M Salt Spray Tester