Technical data

www.kawanlama.com
887
MEASURING AND TESTING EQUIPMENT
PLASTIC, RUBBER, FOOTWEAR
LEATHER AND TEXTILE
M-2000
MOVING DIE RHEOMETER (MDR)
M-2000 Die Rheometer (rotorless cure meter) is used for the
measurement of selected vulcanization characteristics of
rubber compound
Specication
Model
M-2000 A, M-2000 FA
Sealed Die Type
M-2000, M-2000 F
Unsealed Die Type
Die’s Congurations
(optional)
Isolate The Die’s Opening From
The Frame By
The Sealed Ring. The Upper
and Lower Die Can Be Totally
Sealed
Available To Adjust Precisely
The Gap Between Upper
and Lower Die Freely
Produce Spec. ASTM-D5289, ISO-6502, GB-T/16584
Temp. Control Control By Computer and PID.SSR Range: Room Temp.~200°C
Temp. Accuracy Temp. Error ±0.3°C Min. Reading of Temp. 0.1°C
Speed of Heating Room Temp.~ 190°C<8’ 50”
Time for Temp. Change 175°C~190°C<4’ 190°C~175°C<4’ 50”
Oscillation Frequency 100cpm, Driven By Servo Motor
M-2000FA, M-2000F
Foam Force (kg)
P,1~1000
Selectable for Auto Switching or Manually Setting
Torque Range
S’, 1~200 lb-in/S”, 0.3~200 lb-in
Selectable for Auto Switching or Manually Setting
M-2000FA, M-2000F
Pressure Unit
N, dN, kg, lb, N/m2, dN/m2, kg/cm2, lb/in2, kpsi
Torque Unit kg-cm, lb-in, N-m, dN-m
Min. Reading of Torque
and Pressure
0.001 unit
Oscillation Amplitude ±0.5°, ±1°, ±2°, ±3°
Time Range Without Limit; Can Be Change During Test
Power 1ph, 220V ±10%, 50/60Hz ±3Hz, 10A
Pressure 4.6kg/cm2 (0.46 MPa) Prepared By Customer
Dimension (WxDxH)
(cm)
Main Unit : 66 x 66 x 124 Main Unit : 66 x 66 x 115
Test Stand : 60 x 60 x 75
Computer Cabinet : 55 x 60 x 151 (Including The Printer)
Weight (kg) 399 393
Equipped with
Computer X 1(Includes Monitor X1, Hard Disk X1 and Printer X1)
Accessories
Torque Calibrator X1 (Inside The Main Unit), Heater Plate X2,
A Pair of Gloves, Power Regulator X1, Screwdriver X1, Printer
Paper, Sealed Ring X10 (Only for Sealed Die)
GT-7049-B
FOAM RUBBER RECIPROCATING
COMPRESSION TESTER ISO-7214, JIS-K6767
Measure the thickness
of the specimen and
calculate its permanent
deformation rate.
Specication
Stroke (mm) 0~50 (Adjustable)
Distance Between
Compression Plates (mm)
180 (Adjustable)
Area of Compression Plate (cm) 30 x 30
Motor 1ph, AC 1/3 HP
Counter LCD, 0~999,999
Dimension (WxDxH) (cm) 60 x 40 x 75
Weight (kg) 93
Power 1ph, AC 220V, 5A
Order No. Type Description
KH0000016 GT-7049-B
Foam Rubber Reciprocating Compression Tester
Order No. Type Description
KH0000125 M-2000 A Moving Die Rheometer (MDR)
KH0000303 M-2000 Moving Die Rheometer (MDR)
This machine is specially
designed to oer the
standard and objective
illumination in order to
accurately facilitate color
control and comparison
Specication
Light Kinds
International Standard Articial Daylight.
Cool White Flourescent. USA Shop Light
Source
Sun-Setting Light. Yellow Light Source
Ultraviolet Lamp
Interior (WxDxH) (cm) 67 x 38 x 36
Dimension (WxDxH) (cm) 71 x 40 x 57
Weight (kg) 32
Power 1ph, AC 220V, 3A
Order No. Type Description
KH0000002 GT-100 W Super Daylight
SUPER DAYLIGHT
GT-100 W